Topic Path

HP-AR　Medium current range / Bolt on type

Dimensions

Characteristics charts

Feature

Rated current: 200A–1150A
Tri-phase current sensor in the same housing (Good fit 47mm/48mm pitch IGBT Modules)
Operating temperature range: -40℃ to +125℃
Use high performance programmable Hall IC
5V single power supply, ratiometric output (sensitivity and offset)

xEV inverters (HEV, EV, PHEV, etc)

DataSheet

Electrical characteristics Ta=25℃

Type	HP-AR200V2PP5	HP-AR400V2PP5	HP-AR600V2PP5	HP-AR800V2PP5	HP-ARE115V2PP5
Rated current [If]	±200A	±400A	±600A	±800A	±1150A
Output voltage [Vout]	Vout=(Vcc/5)・(V0+G・Ip) (Note3)
Sensitivity [G] (Note4)	10mV/A	5mV/A	3.33mV/A	2.5mV/A	1.74mV/A
Load resistance [RL]	≧2.5kΩ
Sensitivity error I=±If	±1%				±1.5%
Offset voltage [V0] I=0	Vref ±18mV (Vref=Vcc/2)
Output linearity	Within ±1%
Response time	Within 5μs (at di/dt=100A/μs) @LPF(fc=133kHz) connected
Response performance	Within 10% (at di/dt=100A/μs) @LPF(fc=133kHz) connected				Within 15% (at di/dt=100A/μs) @LPF(fc=133kHz) connected
Hysteresis voltage range	±22mV	±15mV	±12mV	±10mV	±9mV
Sensitivity Temp. Coef.	±3%
Offset voltage Temp. Coef.	±30mV
Control power supply [Vcc]	+5V±5%
Ratiometricity error [+5V±5%] Sensitivity	±0.5%
Ratiometricity error [+5V±5%] Offset voltage	±0.4%
Consumption current	Within 40mA
Operating Temp.	-40℃~+125℃
Storage Temp.	-40℃~+125℃
Dielectric withstand voltage	2500V AC 50/60Hz 1minute
Insulation resistance	Not less than 500MΩ 500V DC

Note1）: The indicated offset voltage is the one after the core hysteresis is removed.
Note2）: Output specifications: maximum output current ≦2mA, Load capacitance ≦100pF
Note3）: Vcc: Control power supply, V0: Offset voltage, G: Sensitivity, Ip: Primary current
Note4）: Sensitivity: G=2000mV/If